Millimeters of mercury to Bar conversion table
| Millimeters of mercury | Bar |
|---|---|
| 1 mmHg | 0.0013332239 bar |
| 2 mmHg | 0.0026664477 bar |
| 5 mmHg | 0.0066661194 bar |
| 10 mmHg | 0.0133322387 bar |
| 25 mmHg | 0.0333305969 bar |
| 50 mmHg | 0.0666611937 bar |
| 100 mmHg | 0.1333223874 bar |
How to convert millimeters of mercury to bar
Bar = Millimeters of mercury × 0.0013332239. For example, 2 mmHg = 0.0026664477 bar. Type a value in either box above: the other one updates instantly, both ways.
What is a millimeter of mercury?
A millimeter of mercury (mmHg) is about 133.32 Pa, the unit for blood pressure readings.
What is a bar?
A bar is 100,000 pascals, close to atmospheric pressure at sea level (1.01325 bar).
Which number belongs in the millimeters of mercury input?
Enter the numerical quantity measured in millimeters of mercury, leaving the mmHg symbol in the label rather than inside the input. The second field represents bar and uses bar. Both fields can be edited, but each has its own direction of conversion. Decide which quantity you know before typing. Decimal values are allowed; a mixed fraction or a number followed by descriptive text is not a numeric entry. Use the decimal separator accepted by your browser's number field and avoid pasted thousands separators when a value could be interpreted ambiguously.
How is the conversion calculated?
One millimeters of mercury unit represents 133.322387415 reference units, and one bar unit represents 100000 reference units. First multiply the input by 133.322387415 to reach the family reference quantity. Then divide by 100000 to express that quantity in bar. Combining the two steps gives the factor 0.00133322387415. The direction matters: this factor belongs to millimeters of mercury going to bar, rather than the other way round.
How can I check the intermediate calculation?
For a second worked example, begin with 2.5 mmHg. Multiplying by the source reference factor gives 333.3059685375 reference units. Dividing that intermediate quantity by 100000 gives 0.003333059685375 bar. This two-step route is useful when you want to compare a spreadsheet with a hand calculation. Do not round the intermediate quantity before dividing: a small reference value can carry meaningful digits even when its short display looks close to zero. The reference quantity is not an extra measurement to add; it is the same measurement expressed temporarily on the common scale.
Can I combine values before converting?
If you have two separate quantities of 2.5 mmHg and 5 mmHg, combine them as 7.5 mmHg before converting. Their destination quantities are 0.003333059685375 bar and 0.00666611937075 bar; their sum agrees with 0.009999179056125 bar up to floating-point rounding. This works because a fixed factor distributes over addition. Bring mixed source units to one common unit first, and retain unrounded values when comparing totals. For an average, use the same weighting rule before and after conversion. A unit conversion does not decide whether two underlying quantities should be added or weighted equally in your particular application.
Worked values and a direction check
For 7.5 mmHg, the calculation is 7.5 × 0.00133322387415 = 0.009999179056125 bar. If the input doubles to 15.0 mmHg, the result doubles to 0.01999835811225 bar. Zero converts to zero. These relationships follow from multiplication by a fixed factor. They are useful checks when transcribing a reading or building a spreadsheet formula.
What conventions apply to this family?
Pressure factors refer to pascals. A bar is 100000 pascals, a kilopascal is 1000 pascals, and a standard atmosphere is 101325 pascals. Torr and millimeters of mercury have close but separately defined factors in this implementation. Gauge pressure and absolute pressure are two different reference conventions. A unit conversion preserves whichever convention the source used; it does not add atmospheric pressure. Record whether your instrument reads gauge or absolute values before comparing measurements. A negative gauge reading can describe pressure below its reference, but that does not make a negative absolute pressure physically meaningful. Changing the unit also cannot calibrate a sensor or compensate for temperature.
How much precision should I keep?
The displayed answer is a readable representation of a floating-point calculation. Very large or very small results may appear in scientific notation: the exponent indicates how many places to move the decimal point, rather than another unit. A short displayed factor can hide digits used internally. Use the full conversion expression for a spreadsheet instead of repeatedly multiplying by a rounded answer copied from the table. Round once, at the end, to the resolution your measurement supports. Extra digits in a conversion cannot improve the precision of a ruler, sensor, product label or original estimate.
How can I check a value before reusing it?
Keep both the source quantity and its mmHg unit beside the answer in bar. Use the reverse field or the Swap link to check that converting back approaches the original number. Small differences after copying a rounded answer are expected; a large difference suggests a wrong direction, wrong family, or missing decimal place. Check the order of magnitude as well as the digits. Converting to a smaller unit usually produces a larger count for fixed-factor families, while temperature offsets need their own reference-point checks. An inverse check establishes consistency of the arithmetic, not accuracy of the original measurement.
How do I convert millimeters of mercury to bar?
Use the formula Bar = Millimeters of mercury × 0.0013332239. Type a value in the millimeters of mercury box and the result appears instantly.
How many bar are in 1 millimeter of mercury?
1 mmHg = 0.0013332239 bar.
Is this converter free and private?
Yes. It is free, needs no sign-up, and the calculation runs in your browser: nothing is sent to a server.
Is this gauge or absolute pressure?
The conversion factor is the same for both. Tire gauges show gauge pressure (above the air around you); add about 14.7 psi or 1.013 bar to get absolute pressure.