FreeToolbox24

Inches of mercury to Torr Converter

Maintained by the FreeToolbox24 team. Methodology and test scope

Quick answer: 1 inHg = 25.400004 Torr. To convert inches of mercury to torr, multiply by 25.400004.

inHg
Torr

Torr = Inches of mercury × 25.400004

Swap: Torr to Inches of mercury

Inches of mercury to Torr conversion table

Inches of mercuryTorr
1 inHg25.400004 Torr
2 inHg50.800007 Torr
5 inHg127.000018 Torr
10 inHg254.000036 Torr
25 inHg635.00009 Torr
50 inHg1,270.000181 Torr
100 inHg2,540.000362 Torr

How to convert inches of mercury to torr

Torr = Inches of mercury × 25.400004. For example, 2 inHg = 50.800007 Torr. Type a value in either box above: the other one updates instantly, both ways.

What is an inch of mercury?

An inch of mercury (inHg) is about 3,386 Pa, the unit used in US weather reports and aviation altimeters.

What is a torr?

A torr is 1/760 of a standard atmosphere, about 133.32 Pa, used in vacuum work.

Which number belongs in the inches of mercury input?

Enter the numerical quantity measured in inches of mercury, leaving the inHg symbol in the label rather than inside the input. The second field represents torr and uses Torr. Both fields can be edited, but each has its own direction of conversion. Decide which quantity you know before typing. Decimal values are allowed; a mixed fraction or a number followed by descriptive text is not a numeric entry. Use the decimal separator accepted by your browser's number field and avoid pasted thousands separators when a value could be interpreted ambiguously.

How is the conversion calculated?

One inches of mercury unit represents 3386.388640341 reference units, and one torr unit represents 133.322368421053 reference units. First multiply the input by 3386.388640341 to reach the family reference quantity. Then divide by 133.322368421053 to express that quantity in torr. Combining the two steps gives the factor 25.4000036186446. The direction matters: this factor belongs to inches of mercury going to torr, rather than the other way round.

How can I check the intermediate calculation?

For a second worked example, begin with 2.5 inHg. Multiplying by the source reference factor gives 8465.9716008525 reference units. Dividing that intermediate quantity by 133.322368421053 gives 63.5000090466114 Torr. This two-step route is useful when you want to compare a spreadsheet with a hand calculation. Do not round the intermediate quantity before dividing: a small reference value can carry meaningful digits even when its short display looks close to zero. The reference quantity is not an extra measurement to add; it is the same measurement expressed temporarily on the common scale.

Can I combine values before converting?

If you have two separate quantities of 2.5 inHg and 5 inHg, combine them as 7.5 inHg before converting. Their destination quantities are 63.5000090466114 Torr and 127.000018093223 Torr; their sum agrees with 190.500027139834 Torr up to floating-point rounding. This works because a fixed factor distributes over addition. Bring mixed source units to one common unit first, and retain unrounded values when comparing totals. For an average, use the same weighting rule before and after conversion. A unit conversion does not decide whether two underlying quantities should be added or weighted equally in your particular application.

Worked values and a direction check

For 7.5 inHg, the calculation is 7.5 × 25.4000036186446 = 190.500027139834 Torr. If the input doubles to 15.0 inHg, the result doubles to 381.000054279668 Torr. Zero converts to zero. These relationships follow from multiplication by a fixed factor. They are useful checks when transcribing a reading or building a spreadsheet formula.

What conventions apply to this family?

Pressure factors refer to pascals. A bar is 100000 pascals, a kilopascal is 1000 pascals, and a standard atmosphere is 101325 pascals. Torr and millimeters of mercury have close but separately defined factors in this implementation. Gauge pressure and absolute pressure are two different reference conventions. A unit conversion preserves whichever convention the source used; it does not add atmospheric pressure. Record whether your instrument reads gauge or absolute values before comparing measurements. A negative gauge reading can describe pressure below its reference, but that does not make a negative absolute pressure physically meaningful. Changing the unit also cannot calibrate a sensor or compensate for temperature.

How much precision should I keep?

The displayed answer is a readable representation of a floating-point calculation. Very large or very small results may appear in scientific notation: the exponent indicates how many places to move the decimal point, rather than another unit. A short displayed factor can hide digits used internally. Use the full conversion expression for a spreadsheet instead of repeatedly multiplying by a rounded answer copied from the table. Round once, at the end, to the resolution your measurement supports. Extra digits in a conversion cannot improve the precision of a ruler, sensor, product label or original estimate.

How can I check a value before reusing it?

Keep both the source quantity and its inHg unit beside the answer in Torr. Use the reverse field or the Swap link to check that converting back approaches the original number. Small differences after copying a rounded answer are expected; a large difference suggests a wrong direction, wrong family, or missing decimal place. Check the order of magnitude as well as the digits. Converting to a smaller unit usually produces a larger count for fixed-factor families, while temperature offsets need their own reference-point checks. An inverse check establishes consistency of the arithmetic, not accuracy of the original measurement.

How do I convert inches of mercury to torr?

Use the formula Torr = Inches of mercury × 25.400004. Type a value in the inches of mercury box and the result appears instantly.

How many torr are in 1 inch of mercury?

1 inHg = 25.400004 Torr.

Is this converter free and private?

Yes. It is free, needs no sign-up, and the calculation runs in your browser: nothing is sent to a server.

Is this gauge or absolute pressure?

The conversion factor is the same for both. Tire gauges show gauge pressure (above the air around you); add about 14.7 psi or 1.013 bar to get absolute pressure.