FreeToolbox24

Cubic feet to Gallons (US) Converter

Maintained by the FreeToolbox24 team. Methodology and test scope

Quick answer: 1 ft³ = 7.480519 gal. To convert cubic feet to gallons (US), multiply by 7.480519.

ft³
gal

Gallons (US) = Cubic feet × 7.480519

Swap: Gallons (US) to Cubic feet

Cubic feet to Gallons (US) conversion table

Cubic feetGallons (US)
1 ft³7.480519 gal
2 ft³14.961039 gal
5 ft³37.402597 gal
10 ft³74.805195 gal
25 ft³187.012987 gal
50 ft³374.025974 gal
100 ft³748.051948 gal

How to convert cubic feet to gallons (US)

Gallons (US) = Cubic feet × 7.480519. For example, 2 ft³ = 14.961039 gal. Type a value in either box above: the other one updates instantly, both ways.

What is a cubic foot?

A cubic foot (ft³) is the volume of a 1 ft cube, about 28.32 liters or 7.48 US gallons.

What is a gallon?

A US gallon (gal) is 128 US fluid ounces, exactly 3.785411784 liters.

Which number belongs in the cubic feet input?

Enter the numerical quantity measured in cubic feet, leaving the ft³ symbol in the label rather than inside the input. The second field represents gallons (us) and uses gal. Both fields can be edited, but each has its own direction of conversion. Decide which quantity you know before typing. Decimal values are allowed; a mixed fraction or a number followed by descriptive text is not a numeric entry. Use the decimal separator accepted by your browser's number field and avoid pasted thousands separators when a value could be interpreted ambiguously.

How is the conversion calculated?

One cubic feet unit represents 28.316846592 reference units, and one gallons (us) unit represents 3.785411784 reference units. First multiply the input by 28.316846592 to reach the family reference quantity. Then divide by 3.785411784 to express that quantity in gallons (us). Combining the two steps gives the factor 7.48051948051948. The direction matters: this factor belongs to cubic feet going to gallons (us), rather than the other way round.

How can I check the intermediate calculation?

For a second worked example, begin with 2.5 ft³. Multiplying by the source reference factor gives 70.79211648 reference units. Dividing that intermediate quantity by 3.785411784 gives 18.7012987012987 gal. This two-step route is useful when you want to compare a spreadsheet with a hand calculation. Do not round the intermediate quantity before dividing: a small reference value can carry meaningful digits even when its short display looks close to zero. The reference quantity is not an extra measurement to add; it is the same measurement expressed temporarily on the common scale.

Can I combine values before converting?

If you have two separate quantities of 2.5 ft³ and 5 ft³, combine them as 7.5 ft³ before converting. Their destination quantities are 18.7012987012987 gal and 37.4025974025974 gal; their sum agrees with 56.1038961038961 gal up to floating-point rounding. This works because a fixed factor distributes over addition. Bring mixed source units to one common unit first, and retain unrounded values when comparing totals. For an average, use the same weighting rule before and after conversion. A unit conversion does not decide whether two underlying quantities should be added or weighted equally in your particular application.

Worked values and a direction check

For 7.5 ft³, the calculation is 7.5 × 7.48051948051948 = 56.1038961038961 gal. If the input doubles to 15.0 ft³, the result doubles to 112.207792207792 gal. Zero converts to zero. These relationships follow from multiplication by a fixed factor. They are useful checks when transcribing a reading or building a spreadsheet formula.

What conventions apply to this family?

Every volume factor refers to liters. Teaspoons, tablespoons, fluid ounces, cups, pints, quarts and ordinary gallons use US measures on these pages. A US gallon is 3.785411784 liters; the separate imperial gallon is 4.54609 liters. Check which convention a recipe or equipment label uses before comparing its number with this answer. A fluid ounce measures volume, whereas an ounce in the mass converters measures weight. Equal volumes of two ingredients do not necessarily have equal masses. Cubic meters, feet and inches are already volume units; enter a volume here rather than multiplying a length conversion only once and treating that result as a volume.

How much precision should I keep?

The displayed answer is a readable representation of a floating-point calculation. Very large or very small results may appear in scientific notation: the exponent indicates how many places to move the decimal point, rather than another unit. A short displayed factor can hide digits used internally. Use the full conversion expression for a spreadsheet instead of repeatedly multiplying by a rounded answer copied from the table. Round once, at the end, to the resolution your measurement supports. Extra digits in a conversion cannot improve the precision of a ruler, sensor, product label or original estimate.

How can I check a value before reusing it?

Keep both the source quantity and its ft³ unit beside the answer in gal. Use the reverse field or the Swap link to check that converting back approaches the original number. Small differences after copying a rounded answer are expected; a large difference suggests a wrong direction, wrong family, or missing decimal place. Check the order of magnitude as well as the digits. Converting to a smaller unit usually produces a larger count for fixed-factor families, while temperature offsets need their own reference-point checks. An inverse check establishes consistency of the arithmetic, not accuracy of the original measurement.

How do I convert cubic feet to gallons (US)?

Use the formula Gallons (US) = Cubic feet × 7.480519. Type a value in the cubic feet box and the result appears instantly.

How many gallons (US) are in 1 cubic foot?

1 ft³ = 7.480519 gal.

Is this converter free and private?

Yes. It is free, needs no sign-up, and the calculation runs in your browser: nothing is sent to a server.

Which cups, pints and gallons does this use?

US customary units: 1 cup = 236.588 mL, 1 US gallon = 3.785 L and 1 US fluid ounce = 29.574 mL. The imperial (UK) gallon is larger, 4.546 L, and has its own converter.